如何选择拉手尺寸
1. 通常小于30cm的抽屉或者柜门，建议选单孔或者64mm孔距拉手。
2. 大小30cm-60cm的抽屉或者柜门，建议选单孔或者96mm孔距拉手。
3. 大小60cm-90cm的抽屉或者柜门，建议选单孔或者128mm孔距拉手。
4. 大于90cm以上的柜门，均可以选用128mm孔距拉手。
How to choose the handle size
1. For drawers or cabinet doors that are usually smaller than 30cm, it is recommended to choose single-hole or 64mm-pitch handles.
2. For drawers or cabinet doors with a size of 30cm-60cm, it is recommended to choose a single hole or 96mm hole pitch handle.
3. For drawers or cabinet doors with a size of 60cm-90cm, it is recommended to choose a single hole or 128mm hole pitch handle.
4. For cabinet doors larger than 90cm, 128mm hole pitch handles can be used.
单孔拉手（一个螺丝孔，即只需一个螺丝即可）
Single hole handle (one screw hole, that is, only one screw is required)
双孔拉手及双孔孔距（拉手两边各一个螺丝，两孔中心间的距离为孔距）
Double-hole handle and double-hole hole distance (a screw on each side of the handle, the distance between the centers of the two holes is the hole distance)
如何选用螺丝长度？How to choose the screw length?
木板厚度Board thickness | 18mm | 20mm | 25mm | 30mm | 35mm |
螺丝长度Screw length | 22mm | 25mm | 30mm | 35mm | 40mm |
评论晒单